icon_dep_engENGINEERING DEPARTMENT

In this department the projects are monitored since its budgeting until its conclusion.

 

gabinete-projeto

PROJECT OFFICE

In this section there are skilled professionals for development of the projects in 2D and 3D CAD. The software used is the Solidworks. 

icon_maquinacaoMILLING

AUTOMOLDES is equipped with CNC machining centers that use as CAD software the PowerSHAPE and as CAM the Powermill.

icon_edmEDM / WIRE CUT

In this section is made the finishing of micro-detail by EDM and is performed the cutting and rectification by wire cutting. 

icon_ajusteTOOL ADJUSTMENT AND ASSEMBLY

In this section is held the adjustment of the tool, polishing and small corrections. In addition, in this section is made the final mold assembly. 

icon_ensaio 1st TESTS AND SAMPLES

After finishing the execution of the mold, are performed the first tests on the tool to obtain the first samples. 

icon_analiseMETROLOGY AND CORRECTIONS

Once tested the mold, is performed a dimensional analysis and study on the samples and on the cavity and core of the mould, and there are set the corrections that are necessary implement in the mold for fulfil the requirements.